Carpet tile flooring – Laying a new rug requires precision. But no more than the usual you can handle it yourself. While when carpet tile flooring was laying, one of the most popular housing advice is to let an ice cream melt on the printing label, in order to extend the fiber in the rug so that the label rises and the carpet again becomes planted. However, it is not always a good idea to let an ice-cream melt on a carpet. If the carpet and the floor are completely wet, it will be very difficult to get dried completely.
So there is a risk of mold and destruction of the underlying floor. What can you do to remove pressure marks in the carpet after heavy things? Before you get started, it’s a good idea to find out what the carpet tile flooring is made of. If it’s a wool blanket, the printing brand might disappear by itself a while after you have removed the furniture that has created the printing brand. You can brush the mark easily. Or scratch it with the nail and it will rise after a few weeks. Carpets of wool and nylon have good resilience, while polypropylene and acrylic carpets have a less good resilience.
12 Photos Gallery of: Remove the Print Mark In the Carpet Tile Flooring
Use steam iron; Other tips is recommend using the steam iron to remove the pressure label. You can try this if the brands do not disappear by themselves. Put a cloth on the pressure label, take the steam iron and pass it over the blanket where the pressure mark is. Do not iron the carpet, but steam it while piercing the area. Make sure the carpet tile flooring does not get too hot so the plastic in the rug melts. You can also try spraying the pressure label with water and brush it a little to force the pressure mark away.